Welcome at Digimoba Shop!

Module 9009 Empty field

Module 9009

Empty field

1,05 EUR

( 19 % VAT incl. excl. Shipping costs )

Shipping time: 3 Weeks

4000 Trackswitch ID Manager

The ID Manager is used for writing, testing und reading transponders. Transponders are available in the form of self-adhesive paper or foil, similar to a lable. These transponders are ideal for use on model railways. But this technology is also ideally suited  for cataloguing, marking and marking various objects in collections. Suitable transponders can also be obtained from us.

With the ID Manager, such transponders (IEC 14443) can be written with a four-digit number. These restriction to four digits result from the possibility of the display module 9086 to display only four-digit numbers. This means that it is possible to distinguish between 10.000 (0000 to 9999) different objects (locomotives, wagons etc.). Transponders can be rewritten as often as required.

With the exception of metal, transponders can be read or writtten through all materials up to a thickness of 8-10mm.

70,00 EUR

( 19 % VAT incl. excl. Shipping costs )

Shipping time: 3 Weeks

Module 9010 Line ahead

Module 9010

Line ahead

1,55 EUR

( 19 % VAT incl. excl. Shipping costs )

Shipping time: 3 Weeks

Track Occupancy Indicator 2102 without case

Track Occupancy Indicator 2102 without case

This fourfold track occupancy indicator works via the current sensor principle and can be used for all types of current and control system, including digital DCC, Motorola, MFX, Selectrix etc. The function and occupancy status of the four track sections that can be monitored can be immediately monitored using the four integrated LEDs. All current consumers with a resistance of up to 15 kΩ can be safely detected.
Digimoba signal box displays, our feedback modules 1051 and 1151 or LEDs with series resistors can be connected to the ports for external displays. Each of the four track occupied indicator outlets is capable of delivering up to 2A of switching current, thus making it suitable for use as a track switcher for direct switching.

35,60 EUR

( 19 % VAT incl. excl. Shipping costs )

Shipping time: 3 Weeks

4010 read module

Read modul consisting of two components. Antenna board and reading electronics, connected with enclosed cable. Mounted under a model railway track, it is used to read out RFID transponders quided over it. Range up to 30mm. Read-out data are output via the Trackswitch feedback bus either to the Trackswitch control panel, to a display module 9086 directly with cable 8030 (2m, other lengths possible) or via an adapter cable to any S88 feedback system.

38,00 EUR

( 19 % VAT incl. excl. Shipping costs )

Shipping time: 3 Weeks

Module 9011 Line symbol 45°

Module 9011

Line symbol 45°

1,55 EUR

( VAT excl. excl. Shipping costs )

Shipping time: 3 Weeks

9086 Display module

Four-digit display module for installation in the Digimoba track control panel. Can also be integratet into other track control panel systems (selfmade). Used in conjunction with the reader module 4010 to display four-digit transponder numbers, Thus the position of a certain vehicle or whole train (train number) can be unmistakably in the track diagram.

50,85 EUR

( 19 % VAT incl. excl. Shipping costs )

Shipping time: 3 Weeks

Relay Module 2011

Relay Module 2011

The relay module houses 2 independently usable two-state relays each with two switch contacts. Each circuit in a relay is capable of carrying up to 2A and is designed for a maximum switching current of 24V. The relay is triggered by a negative impulse (ground). The position of each relay is retained even once the voltage has been switched off. Place and position of installation are uncritical. In addition to direct current voltage between 12 and 18V, this relay module can be operated with 16V alternating current voltage.
Available with casing as 2011 or, at a lower price, without casing as 2111.

30,70 EUR

( 19 % VAT incl. excl. Shipping costs )

Shipping time: 3 Weeks

Module 9012 Line symbol 45° parallel

Module 9012

Line symbol 45° parallel

1,55 EUR

( 19 % VAT incl. excl. Shipping costs )

Shipping time: 3 Weeks