Deutsch English

Module 9084 Module for set of points, right point symbol with 3 yellow long field luminous diodes

Module 9084 Module for set of points, right point symbol with 3 yellow long field luminous diodes
Zoom image

7,65 EUR

16 % VAT incl. excl. Shipping costs

Shipping time: 3-4 Days

Product no.: 9084
Module 9084 Module for set of points, right point symbol with 3 yellow long field luminous diodes

Module 9084

Module for set of points, right point symbol with 3 yellow long field luminous diodes

 

Customers who bought this product also bought the following products:

Module 9014  Left hand deflection without function

Module 9014 Left hand deflection without function

Module 9014

Left hand deflection without function

1,32 EUR (16 % VAT incl. excl. Shipping costs)
Module 9015 Right hand deflection without function

Module 9015 Right hand deflection without function

Module 9015

Right hand deflection without function

1,32 EUR (16 % VAT incl. excl. Shipping costs)
Starter Kit 1002B

Starter Kit 1002B

Starter Kit 1002B

This set contains everything you need in order to operate Trackswitch in a model railway system. The decoder 1132 (included in the set) is ideally suited to use with motorised point mechanisms. Up to 4 point mechanisms can be connected and these are especially protected by the decoder. Addresses and output circuit times can be programmed. It therefore plays no role whether or not the point machines are fitted with functional limit stops. The power supply is provided from the Trackswitch centre via the switch decoder bus line (1m, also enclosed). As such, the centre ensures the serial activation of the operators – that is, only one operator is ever switched at one time – thus maintaining a low current load on the power supply.

 For using Trackswitch, Signal box, switch commands, indication controls, shadow station controls, commuter train controls, turnaround loop controls,

231,61 EUR (16 % VAT incl. excl. Shipping costs)
Track Occupancy Indicator 2102 without case

Track Occupancy Indicator 2102 without case

Track Occupancy Indicator 2102 without case

This fourfold track occupancy indicator works via the current sensor principle and can be used for all types of current and control system, including digital DCC, Motorola, MFX, Selectrix etc. The function and occupancy status of the four track sections that can be monitored can be immediately monitored using the four integrated LEDs. All current consumers with a resistance of up to 15 kΩ can be safely detected.
Digimoba signal box displays, our feedback modules 1051 and 1151 or LEDs with series resistors can be connected to the ports for external displays. Each of the four track occupied indicator outlets is capable of delivering up to 2A of switching current, thus making it suitable for use as a track switcher for direct switching.

30,41 EUR (16 % VAT incl. excl. Shipping costs)
Switch Decoder 1130

Switch Decoder 1130

Switch Decoder 1130

The Switch Decoder 1130 switches points, signals, relay modules, sound modules, decouplers and other electrically operated elements. Every switch decoder has 16 outlets for 8 points (magnetic twin coil operators), for example. All outlets are switched to ground with an impulse of 0.2 seconds, making it possible to use point mechanisms without individual limit switch contacts. Each outlet can withstand up to 1.5A and, thanks to the circuit breaker in the central control unit, short-circuits have no adverse effect. Each switch decoder is addressed via a 4-pin DIP switch. In this way, it is possible to connect up to 16 differently addressed switch decoders to a control centre, resulting in 128 possible switch addresses. A 15-pole cable provides the connection. Every switch decoder is fitted with a connector and a connection jack to connect this cable to the next switch decoder. The switch decoder can be fitted wherever it is required, including underneath the system. All the necessary ports required for the power supply to the points, signals, etc. to be switched are located on the switch decoders, eliminating the need for additional cabling and reducing the length of time required to set up the model railway system.

The Switch-to-Ground Prinzip is to make it possible to use external power with higher voltage (up to 24V DC) for more powerfull switching and saving power from the trackswitch voltage source.

 

37,04 EUR (16 % VAT incl. excl. Shipping costs)
Relay Module 2111 without case

Relay Module 2111 without case

Relay Module 2111 without case

The relay module houses 2 independently usable two-state relays each with two switch contacts. Each circuit in a relay is capable of carrying up to 2A and is designed for a maximum switching current of 24V. The relay is triggered by a negative impulse (ground). The position of each relay is retained even once the voltage has been switched off. Place and position of installation are uncritical. In addition to direct current voltage between 12 and 18V, this relay module can be operated with 16V alternating current voltage.
Available with casing as 2011 or, at a lower price, without casing as 2111.

23,39 EUR (16 % VAT incl. excl. Shipping costs)

This Product was added to our catalogue on Wednesday 04 March, 2015.

[<<First] | [<Back] | [Overview] | [Next>] | Product 49 of 50 in this category

Shopping cart

You do not have any products in your shopping cart yet.

Welcome back!

E-mail address:
Password:
Forgot your password?

Newsletter subscription

E-mail address:

Customer group


Customer group: Guest

Manufacturer information

Digimoba Elektronic
Digimoba Elektronic
More products

Manufacturer

Parse Time: 0.080s