Deutsch English


Zoom image

2,70 EUR

19 % VAT incl. excl. Shipping costs

Shipping time: 3 Weeks

Product no.: 8030

Customers who bought this product also bought the following products:

Module 9072 Module for set of points for the Rail occupied illumination, 45 parallel, with 2 red long field luminous diodes

Module 9072 Module for set of points for the Rail occupied illumination, 45 parallel, with 2 red long field luminous diodes

Module 9072

Module for set of points for the Rail occupied illumination, 45° parallel, with 2 red long field luminous diodes

 

 

7,55 EUR (19 % VAT incl. excl. Shipping costs)
Module 9081 Module for set of points, 45 with yellow long field luminous diode

Module 9081 Module for set of points, 45 with yellow long field luminous diode

Module 9081

Module for set of points, 45° with yellow long field luminous diode

 

 

6,50 EUR (19 % VAT incl. excl. Shipping costs)
Module 9082 Module for set of points, 45 parallel, with 2 yellow long field luminous diodes

Module 9082 Module for set of points, 45 parallel, with 2 yellow long field luminous diodes

Module 9082

Module for set of points, 45° parallel, with 2 yellow long field luminous diodes

 

 

7,55 EUR (19 % VAT incl. excl. Shipping costs)
9086 Display module

9086 Display module

Four-digit display module for installation in the Digimoba track control panel. Can also be integratet into other track control panel systems (selfmade). Used in conjunction with the reader module 4010 to display four-digit transponder numbers, Thus the position of a certain vehicle or whole train (train number) can be unmistakably in the track diagram.

48,00 EUR (19 % VAT incl. excl. Shipping costs)
Digital Start-brake-go slow Module 2025

Digital Start-brake-go slow Module 2025

Digital Start-brake-go slow Module 2025

This new development from 2015 is the ‘digital brother’ of its analogue counterparts. The module was designed for the DCC digital system. With this module, independent block section controls, as well as set-ups as go slow tracks, steep descents, in connection with 3-aspect signals as speed-dependent entries to/ exits out of train stations or other operationally necessary go slow areas are also possible. The integrated speed recognition controls the variable go slow passage, thus enabling pinpoint stopping. With a setting controller, calibration of the working sections of varying length is possible to a large extent. The respective start/ brake acceleration is individually set in the decoder CVs for each vehicle. With this module, digitally operated systems become hugely more convenient, avoiding the need to fall back on a computer and the necessary software.

Due to its easy controllability from the outside, this module is ideally suited to integration into systems which use the Trackswitch control system, and multiple 2025 modules can be combined in a cascade to create an independent block system without the need for additional electronic wiring or equipment. Even the block signals (light signals) can be directly connected. Thanks to built-in delays, operation with the 2025 module is particularly realistic. The train only sets off once the signal has been green for 3 seconds. The segment being left is only declared as free 5 seconds after being vacated by the last vehicle.

Transit in the opposite direction at a red signal is possible both at normal and go slow speed.

And the best bit – for all of these features and functions, you do not need a specialised decoder! Any DCC decoder can be used, as the previously required braking systems for DCC digital (ABC, brakes with direct current, etc.) are not needed here.

 

55,00 EUR (19 % VAT incl. excl. Shipping costs)
4000 Trackswitch ID Manager

4000 Trackswitch ID Manager

The ID Manager is used for writing, testing und reading transponders. Transponders are available in the form of self-adhesive paper or foil, similar to a lable. These transponders are ideal for use on model railways. But this technology is also ideally suited  for cataloguing, marking and marking various objects in collections. Suitable transponders can also be obtained from us.

With the ID Manager, such transponders (IEC 14443) can be written with a four-digit number. These restriction to four digits result from the possibility of the display module 9086 to display only four-digit numbers. This means that it is possible to distinguish between 10.000 (0000 to 9999) different objects (locomotives, wagons etc.). Transponders can be rewritten as often as required.

With the exception of metal, transponders can be read or writtten through all materials up to a thickness of 8-10mm.

56,50 EUR (19 % VAT incl. excl. Shipping costs)

This Product was added to our catalogue on Sunday 24 February, 2019.

[<<First] | [<Back] | [Overview] | [Next>] | [last>>] | Product 17 of 19 in this category

Shopping cart

You do not have any products in your shopping cart yet.

Welcome back!

E-mail address:
Password:
Forgot your password?

Newsletter subscription

E-mail address:

Customer group


Customer group: Guest

Manufacturer information

Digimoba Elektronic
Digimoba Elektronic
More products

Manufacturer

Parse Time: 0.081s