Deutsch English

Module 9010 Line ahead

Module 9010 Line ahead
Zoom image

1,35 EUR

19 % VAT incl. excl. Shipping costs

Shipping time: 3-4 Days

Product no.: 9010
Module 9010 Line ahead

Module 9010

Line ahead

 

Customers who bought this product also bought the following products:

Starter Kit 1002B

Starter Kit 1002B

Starter Kit 1002B

This set contains everything you need in order to operate Trackswitch in a model railway system. The decoder 1132 (included in the set) is ideally suited to use with motorised point mechanisms. Up to 4 point mechanisms can be connected and these are especially protected by the decoder. Addresses and output circuit times can be programmed. It therefore plays no role whether or not the point machines are fitted with functional limit stops. The power supply is provided from the Trackswitch centre via the switch decoder bus line (1m, also enclosed). As such, the centre ensures the serial activation of the operators – that is, only one operator is ever switched at one time – thus maintaining a low current load on the power supply.

 For using Trackswitch, Signal box, switch commands, indication controls, shadow station controls, commuter train controls, turnaround loop controls,

237,60 EUR (19 % VAT incl. excl. Shipping costs)
Track Occupancy Indicator 2102 without case

Track Occupancy Indicator 2102 without case

Track Occupancy Indicator 2102 without case

This fourfold track occupancy indicator works via the current sensor principle and can be used for all types of current and control system, including digital DCC, Motorola, MFX, Selectrix etc. The function and occupancy status of the four track sections that can be monitored can be immediately monitored using the four integrated LEDs. All current consumers with a resistance of up to 15 kΩ can be safely detected.
Digimoba signal box displays, our feedback modules 1051 and 1151 or LEDs with series resistors can be connected to the ports for external displays. Each of the four track occupied indicator outlets is capable of delivering up to 2A of switching current, thus making it suitable for use as a track switcher for direct switching.

31,20 EUR (19 % VAT incl. excl. Shipping costs)
Switch Decoder 1130

Switch Decoder 1130

Switch Decoder 1130

The Switch Decoder 1130 switches points, signals, relay modules, sound modules, decouplers and other electrically operated elements. Every switch decoder has 16 outlets for 8 points (magnetic twin coil operators), for example. All outlets are switched to ground with an impulse of 0.2 seconds, making it possible to use point mechanisms without individual limit switch contacts. Each outlet can withstand up to 1.5A and, thanks to the circuit breaker in the central control unit, short-circuits have no adverse effect. Each switch decoder is addressed via a 4-pin DIP switch. In this way, it is possible to connect up to 16 differently addressed switch decoders to a control centre, resulting in 128 possible switch addresses. A 15-pole cable provides the connection. Every switch decoder is fitted with a connector and a connection jack to connect this cable to the next switch decoder. The switch decoder can be fitted wherever it is required, including underneath the system. All the necessary ports required for the power supply to the points, signals, etc. to be switched are located on the switch decoders, eliminating the need for additional cabling and reducing the length of time required to set up the model railway system.

The Switch-to-Ground Prinzip is to make it possible to use external power with higher voltage (up to 24V DC) for more powerfull switching and saving power from the trackswitch voltage source.

 

38,00 EUR (19 % VAT incl. excl. Shipping costs)
Relay Module 2111 without case

Relay Module 2111 without case

Relay Module 2111 without case

The relay module houses 2 independently usable two-state relays each with two switch contacts. Each circuit in a relay is capable of carrying up to 2A and is designed for a maximum switching current of 24V. The relay is triggered by a negative impulse (ground). The position of each relay is retained even once the voltage has been switched off. Place and position of installation are uncritical. In addition to direct current voltage between 12 and 18V, this relay module can be operated with 16V alternating current voltage.
Available with casing as 2011 or, at a lower price, without casing as 2111.

24,00 EUR (19 % VAT incl. excl. Shipping costs)
Feedback Module 1151 without case

Feedback Module 1151 without case

Feedback Module 1151 without case

Specifically developed in accordance with modern model railway system requirements. Each feedback module has 8 isolated inlets, electrically separated from the electronic system by optocouplers. The feedback module is connected to the centre 1000 or 1100 using a separate 6-pin cable with modular plugs (8015-19). The feedback modules are simply connected in a row and so can be expanded to up to 32 modules. Thus, up to 256 feedback signals can be fed in. This includes in particular line occupied signals, track switches, track contacts, point position feedback signals, timers, switch keys and other switching operations. Switch keys can also be connected within the signal box for some specific applications (e.g. for track splitting, for operating special edition models and working models, etc.), in order to activate defined processes and automatic mechanisms. These are specified in advance in the central unit ‘Trackswitch’.

34,50 EUR (19 % VAT incl. excl. Shipping costs)
Display Modul 1140

Display Modul 1140

Display Module 1140

The Display Module 1140 enables the visual display of the operational state of your system on the track control panel. Information relating to active routes, track occupied notifications, signals, point positions, etc. can be displayed here. 8 displays can be connected to each display module. Each of the outlets can be loaded with up to 0.5A, carrying a positive potential of 16V. Displays in the track control panel should preferably be constructed using LEDs in order to reduce the overall power requirements of larger systems. As such, this module is not only particularly suitable for being connected to the Digimoba track layout modules, but also for commercially available LEDs with series resistor (c. 1.5kΩ). Up to 64 display modules in a row can be connected to the display bus on the central control system Trackswitch, making it possible to have up to 512 displays on the track control panel. As the display modules were specially designed for this purpose in the track control panel, they are mounted appropriately below the track control panel. All of the connections required to operate the track layout displays, including the collective ground connection, can be found on the display module, eliminating the need for extra supply lines.

25,10 EUR (19 % VAT incl. excl. Shipping costs)

This Product was added to our catalogue on Wednesday 04 March, 2015.

[<Back] | [Overview] | [Next>] | [last>>] | Product 2 of 49 in this category

Shopping cart

You do not have any products in your shopping cart yet.

Welcome back!

E-mail address:
Password:
Forgot your password?

Newsletter subscription

E-mail address:

Customer group


Customer group: Guest

Manufacturer information

Digimoba Elektronic
Digimoba Elektronic
More products

Manufacturer

Parse Time: 0.219s