Deutsch English

Universal Decoder 1131

Universal Decoder 1131

Zoom Zoom image

39,30 EUR

19 % VAT incl. excl. Shipping costs

Shipping time: 3 Weeks

Product no.: 1131
Manufacturer part number: 1131
Manufacturer: Digimoba Elektronic
More products of: Digimoba Elektronic

Print datasheet

Universal Decoder 1131

The Universal Decoder 1131 is freely programmable in terms of both its receiving address and its outlet switch time, and a special programming mode is incorporated in control centres with software version V2.12. and above for this purpose. The outlet switch times can be selected from 10 speeds from 0.2 seconds right through to continuous operation. Continuous operation is intended for use with the direct connection of light signals, thus four of the eight outlets are always active in this operating mode. The eight outlets are assigned to four pairs of address outlets. In continuous operation, the odd outlets are active (always the left-hand connector when connectors are lying upwards) in the home position (that is, after switching on the power supply) = stop (red).
For direct connections of motor-operated point mechanisms, switch times of 0.2 to 15 seconds can be programmed for the changeover time, thus eliminating the need for additional relay modules and their extra wiring. For motor-operated point mechanisms we offer the type 1132 / 1032 specialized for this using

 

The Switch-to-Ground Prinzip is to make it possible to use external power with higher voltage (up to 24V DC) for more powerfull switching and saving power from the trackswitch voltage source.

Customers who bought this product also bought the following products:

Relay Module 2011

Relay Module 2011


Relay Module 2011

The relay module houses 2 independently usable two-state relays each with two switch contacts. Each circuit in a relay is capable of carrying up to 2A and is designed for a maximum switching current of 24V. The relay is triggered by a negative impulse (ground). The position of each relay is retained even once the voltage has been switched off. Place and position of installation are uncritical. In addition to direct current voltage between 12 and 18V, this relay module can be operated with 16V alternating current voltage.
Available with casing as 2011 or, at a lower price, without casing as 2111.

 

30,70 EUR (19 % VAT incl. excl. Shipping costs)
Track Module 2024 for two-wire DC, analogue, specifically for block operation

Track Module 2024 for two-wire DC, analogue, specifically for block operation


Track Module 2024 for two-wire DC, analogue, specifically for block operation

Anyone who has built electronic modules for controlling starting and braking into their system before is familiar with a particular problem – while one train reaches its precise stopping point, a second stops hugely short of it and a third even continues at such a speed that it overshoots the mark entirely or halts abruptly! Regardless of what control attempts are made, nothing is 100% suitable for all vehicles! This is the result of the varying driving characteristics of each of the individual traction units. Therefore, we have developed a track module with speed-regulated delay. By measuring the approaching train, the slow speed during deceleration is set. In this way, faster trains are decelerated more, whereas slower trains are decelerated to a lesser extent, thus allowing each train to arrive at its intended target.

This microprocessor-controlled module functions using pulse width control. 64 speeds are available. It is specifically for use in block sections and is controlled by the input for occupancy indication for the next track section or ground potential (=free) in connection with the three built-in track occupied indicators.

For use in block sections, single- and double-track, without influence in opposite direction. Aside from the occupancy indicator outlets for all three individual sections, there is also an overall occupancy indicator outlet for switching multiple track component 2024s in a row in automatic block section operation or for feedback via feedback modules 1051 and 1151. In addition to this, a light block signal can also be attached. As such, this compact device enables complete and independent block control. One 2024 module is required per block section.

Transit in the opposite direction at a red signal is possible and occurs without influencing the train.

Requires a traction current source (max. 12V=) and an adjunct current supply (16V~ or =) to operate.

Also available without casing at a lower price as 2124.

 

52,60 EUR (19 % VAT incl. excl. Shipping costs)
Feedback Module 1151 without case

Feedback Module 1151 without case


Feedback Module 1151 without case

Specifically developed in accordance with modern model railway system requirements. Each feedback module has 8 isolated inlets, electrically separated from the electronic system by optocouplers. The feedback module is connected to the centre 1000 or 1100 using a separate 6-pin cable with modular plugs (8015-19). The feedback modules are simply connected in a row and so can be expanded to up to 32 modules. Thus, up to 256 feedback signals can be fed in. This includes in particular line occupied signals, track switches, track contacts, point position feedback signals, timers, switch keys and other switching operations. Switch keys can also be connected within the signal box for some specific applications (e.g. for track splitting, for operating special edition models and working models, etc.), in order to activate defined processes and automatic mechanisms. These are specified in advance in the central unit ‘Trackswitch’.

31,20 EUR (19 % VAT incl. excl. Shipping costs)
Two-way Track Module 2121, DC, analogue without case

Two-way Track Module 2121, DC, analogue without case


Two-way Track Module 2121, DC, analogue without case

Anyone who has built electronic modules for controlling starting and braking into their system before is familiar with a particular problem – while one train reaches its precise stopping point, a second stops hugely short of it and a third even continues at such a speed that it overshoots the mark entirely or halts abruptly! Regardless of what control attempts are made, nothing is 100% suitable for all vehicles! This is the result of the varying driving characteristics of each of the individual traction units. Therefore, we have developed a track module with speed-regulated delay. By measuring the approaching train, the slow speed during deceleration is set. In this way, faster trains are decelerated more, whereas slower trains are decelerated to a lesser extent, thus allowing each train to arrive at its intended target.

This microprocessor-controlled module functions using pulse width control. 64 speeds are available. The module can be used in both directions and is controlled by the polarity of the traction voltage and an individual control input for each direction dependent on the three integrated track occupancy indicators.

For use with station tracks that are used in both directions, block sections, single- and double-track in both directions. Aside from the occupancy indicator outlets for all three individual sections, there is also an overall occupancy indicator outlet for switching multiple track component 2021s in a row in automatic block section operation or for feedback via feedback modules 1051 and 1151.

Requires a traction current source (max. 12V=) and an adjunct current supply (16V~ or =) to operate.

Also available without casing at a lower price as 2121.

53,90 EUR (19 % VAT incl. excl. Shipping costs)
Module 9085 Module for set of points, combined Rail occupied illumination with seaway illumination

Module 9085 Module for set of points, combined Rail occupied illumination with seaway illumination


Module 9085

Module for set of points, combined Rail occupied illumination with seaway illumination

 
7,90 EUR (19 % VAT incl. excl. Shipping costs)
Module 9082 Module for set of points, 45° parallel, with 2 yellow long field luminous diodes

Module 9082 Module for set of points, 45° parallel, with 2 yellow long field luminous diodes


Module 9082

Module for set of points, 45° parallel, with 2 yellow long field luminous diodes

 

 
7,90 EUR (19 % VAT incl. excl. Shipping costs)

This Product was added to our catalogue on 27/02/2015.

[<Back] |  [Overview] |  [Next>] |  [last>>] |  Product 2 of 5 in this category

Shopping cart

You do not have any products in your shopping cart yet.

Welcome back!

Newsletter subscription

E-mail address:

The newsletter can be canceled here or in your Account at any time.

Customer group


Customer group: Guest

Shipping country

Manufacturer information

Digimoba Elektronic
More products

Manufacturer